1. DKL Metals Is the Only UK Licensed Source for SN100C Lead–Free Solder
(Industry News/Europe)

...used may look similar, all of these alloys contain additional alloying elements to the proven, patented SNCuNiGe mix, none of which have any long-term user or reliability data to support their claims,...

2. Kester to Exhibit Leading Fluxes, Pastes and Wires at SMTA Atlanta
(Industry News/America)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

3. Kester’s Peter Biocca to Present at SMTA Atlanta 2009
(Industry News/America)

... Carlos Rivas of SMT Dynamics, will present a paper titled, “Case Study on the Validation of SAC305 and SnCu Based Solders in SMT, Wave and Hand-soldering at the Contract Assembler Level,” at the upco...

4. Test data requirements for assessment of alternative Pb–free solder alloys
(Technical Articles/Lead-free)

...ting risks, the authors have defined a set of tests that can be used for assessing new SnAgCu, SnAg and SnCu alloys for general use in electronics. The core assessment is based on reliability tests, m...

5. Nihon Superior to Participate in SMTA International 2008
(Special Features/SMTAI 2008)

... will present in conjunction with Joelle Arnold of DfR Solutions on “Reliability Testing of Ni-Modified SnCu and SAC305 - Vibration”. The paper provides some preliminary evidence that the Ni-modi...

6. Nihon Superior USA – Booth 249
(Special Features/Apex 2008)

Nihon Superior’s unique SnCuNiGe solder, SN100C®, that has established itself as the best alloy for lead–free wave soldering, will now be available as a high–performance solder past

7. Kester – Booth 1660
(Special Features/Apex 2008)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

8. Kester to Showcase TSF–6852 at SEMICON West 2007
(Special Features/SEMICON West 2007)

...nBiAg, etc.) as well as typical tin-lead eutectic and the higher melting point, lead-free alloys (SnAg, SnCu, SnAgCu, SnSb, etc.). Post-reflow, the residues are completely soluble in water and do not ...

9. CALL FOR PARTICIPATION
(Association News/Europe)

...cts, including; Design for Reliability · Alloy selection, composition effects (SAC305, 205, 105, SnCuNi, etc.) · PCB FAB Specification · Moisture Sensitivity Processing · Solderabili...

10. Call for participation: lead–free reliability and reliability testing
(Industry News/World)

...bjects, including; Design for Reliability Alloy selection, composition effects (SAC305, 205, 105, SnCuNi, etc.) PCB FAB Specification Moisture Sensitivity Processing Solderability Mi...

11. Kester – Booth 7364
(Special Features/SEMICON West 2007)

...r consistent high–speed printing applications. Compatible with lead–free alloys such as SnAg, SnCu, SnAgCu, SnAgBi, TSF–6592LV is RoHS compliant, reflow–able with peak temperatures...

12. Kester wins an innovation award for Ultrapure® K100LD
(Industry News/America)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

13. 7.2 – Validation of SAC305 and SnCu–based solders at the contract assembler level
(Technical Articles/Lead-free)

... were achieved with no soldering defects. SAC305 was used for the reflow process and tin-copper-nickel (SnCu) based solder K100 was used in the wave soldering operation and for hand assembly. Read the...

14. 7.2 – February 2007
(Online Issues/Online Issues)

Issue 7.2 – February 2007 The validation of SAC305 and SnCu–based solders at the contract assembler level by Peter Biocca, Carlos Rivas Process improvement with selective solder by Jo

15. Kester wins a VISION award for Ultrapure® K100LD
(Industry News/America)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

16. 6.10 – Tin–copper based solder options for lead–free assembly
(Technical Articles/Lead-free)

Tin–silver–copper has received much publicity in recent years as the lead–free solder of choice.   Tin-silver-copper has received much publicity in recent years as the lead-free

17. Visit Kester’s lead–free information center at GlobalTronics 2006
(Industry News/World)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

18. Kester wins 2006 Global Technology Award for Ultrapure® K100LD
(Industry News/America)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

19. Get valuable lead–free information from Kester at Mexitrónica 2006
(Industry News/America)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

20. Kester to showcase Ultrapure® K100LD at Mexitrónica 2006
(Industry News/America)

...0LD represents an improvement over competitive alloys, including other variations of tin-copper-nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

21. Kester – Booth 2A41
(Special Features/Nepcon South China 2006)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

22. Kester – Booth #5236
(Special Features/ATExpo)

...0LD represents an improvement over competitive alloys, including other variations of Tin-Copper-Nickel (SnCuNi). K100LD is a low-cost (silver-free) lead-free alloy primarily containing tin and copper ...

23. Low–cost lead free development and evaluation kits from Intertronics
(Products News/New Products)

...ng: A Tarray96-.5mm-8mm-DC-LF, PBGA256-1.0mm-17mm-DC-LF, LQFP64-7mm-.4mm-2.0 DC-Sn, FP208-28mm-.5mm-2.6 SnCu, QFP100-14x20mm-.65mm-2.0 DC SnCu, SSOP20T-5.3mm-DC-Sn, SO16GT-7.6mm-DC-Sn, PLCC68T-DC-Sn, ...

24. ELFNET delivers lead–free solder alloy properties database
(Association News/Europe)

...e reference link below: A second version will expand the range of the database to include SnAg and SnCu alloys. www.europeanleadfree.net   ...