IPC APEX Expo 2012

Just-in-time programming reduces costs and risks with Factory Integration

The new Sentry will be displayed on the KE-2070/2080 line, bringing together the fastest RCFA tool in the industry and combining it with visual traceability.

iFlex produces the highest board quality since it uses Assembléon’s unique single-pick/single-place technology, giving the industry’s highest First Pass Yield production levels with defect levels of less than 10 DPM.

The SonoFlux Servo WS is a fully automated reciprocating ultrasonic spray fluxing system that is designed for spraying water soluble/organic acid fluxes.

With a placement accuracy of 30 µm, 3 sigma and a price of under $50,000, the MC-385 pick and place has become a value and performance benchmark for mid-volume PCB assembly.

Also on display, the TS7000IMP uses a feed screw (auger) to dispense fluid with a rotary displacement action, allowing ultra-precise control of the dispensing process.

The model 2800 was designed as a low volume production programmer and can utilize up to four socket cards.

GEN3 Systems’ CM-Series Ionic Cleanliness testers are an established industry leader with more than 2,000 systems installed worldwide.

NPL Defect Clinic gets marching orders for IPC APEX EXPO 2012

“This is one of the most significant government regulations to affect the industry since RoHS,” says Tony Hilvers, IPC vice president of industry programs.

The Mounter Nozzle Cleaner cleans 20 nozzles at a time.

The Clever Dispense 05 is a manual, table top unit that dispenses a variety of materials across a wide range of viscosities.

The SP700avi will be on display with a clear bottom, demonstrating the system’s design simplicity and ease of maintenance.

The new High Solids Filtration System on the Lead-Free EVS 7000 dramatically increases air flow and dust/smoke capture.

The new training board has been built to allow us to show exactly what JTAG/boundary-scan is capable of in the second decade of the 21st century.

Since its introduction, the MAGNUS HD TREND from Tagarno has rapidly achieved industry acceptance as one of the most useful inspection and manufacturing tools in the industry.

SN100C P520 is a high-reliability no-clean lead-free solder paste optimized to deliver good reflow with chip components down to 01005 (0402 metric).

The StencilWasher-CLR Zero Discharge Ultrasonic Stencil Cleaning System is designed to remove all solder paste types including no-clean, rosin, and water soluble as well as all uncured SMT adhesives.

ACD recognizes that its customers outsource their manufacturing needs for several reasons.

PYRAMAX™ reflow ovens set the industry standard for thermal performance, providing electronics manufacturers with the highest throughput to compete successfully in today’s challenging marketplace.