The global assembly journal for SMT and advanced packaging professionals
The question has been brought to me as how long is the typical life span of a stencil? The concern is the thickness of the stencil, I couldn\'t provide a defined answer as there as so many variables in the printer. Does anyone know of any guige lines for testing these? Thanks.
 -  in: Solder paste & printing  - 1 Answers
Best IR rework machine
 -  in: Components & placement  - 6 Answers
What are the main criteria in choosing an AOI system?
 -  in: Inspection  - 3 Answers
Jennifer
 -  in: Cleaning  - 3 Answers
Would you recommend Boundary Scan over In-Circuit Test?
 -  in: Test & Measurement  - 5 Answers
Please tell me the Bga rework profile process and the bottom heater, IR heater& top heater temparature settings?
 -  in: Components & placement  - 1 Answers
Why does 5 mil stencil produce 6 mil thickness solder paste?
 -  in: Solder paste & printing  - 6 Answers
Small PEM tube packaging strips
 -  in: Handling & storage  - 0 Answers
During RoHS wave soldering process what temperature is more significant? Solder bath temp. or temperature of wave at the point of joint formation?
 -  in: Solder, flux & soldering  - 2 Answers
How to solve warpage problem in wave soldering machine for FR1 PCB?
 -  in: Wave Soldering  - 2 Answers
What is the best method of dealing with waste solder paste when it is removed from the stencil
 -  in: Solder paste & printing  - 3 Answers
Is there a standard ar quality for cleaning rooms that assemble general SMT PCBs?
 -  in: Cleaning  - 1 Answers
Lead Solder Contamination
 -  in: RoHS & Lead Free  - 2 Answers
What type OF solder Wire should i use to solder thermocouples for profiling reflow oven?
 -  in: Solder, flux & soldering  - 12 Answers
Can you explain me how to clean glue dispenced board , & where it is defined in IPC standard?
 -  in: Adhesives & dispensing  - 6 Answers
Component Footprints
 -  in: Components & placement  - 4 Answers
In SMT, while placing THT transformer component of lead thickness 3mm (PCB thickness 2mm) step up location in stencil has a paste height of 12 mils, But after reflow i am facing blow hole issue. Any suggestions to solve the issue??
 -  in: Solder, flux & soldering  - 5 Answers
For my 5 mil stencil how much solder paste height should be define?
1
 -  in: Solder paste & printing  - 5 Answers
what do you think about FUJI XPF-L P&P ?
 -  in: Components & placement  - 1 Answers
what is safe storage time for smd components ?
 -  in: Handling & storage  - 2 Answers
Hand Soldering Station Power
 -  in: Solder, flux & soldering  - 4 Answers
Is there a standard available or regulation that states the requirements for shipping Printed Circuit Board Assemblies over seas either by air or boat?
 -  in: Handling & storage  - 5 Answers
Where can i find performance reviews of SMT pick & place equipment including assembleon\'s equipment
1
 -  in: Components & placement  - 4 Answers
SMT Optimisation
 -  in: Programming  - 7 Answers
Pick & Place / Chip Mounter panel support
 -  in: Components & placement  - 4 Answers
What website can I find details of an EPE 20/20 pick and place machine ?
 -  in: Components & placement  - 3 Answers
Could thievage affect oven profiles?
 -  in: Solder, flux & soldering  - 3 Answers
Reflow Specifications for Hallogen Free PCB with Hallogen Free PAste
 -  in: Solder, flux & soldering  - 2 Answers
Solder Iron Tip Go/No Go Indicators
 -  in: Solder, flux & soldering  - 3 Answers
Market for short run prototypes?
 -  in: Components & placement  - 20 Answers
Display #
Page 1 of 2

 

RSS Feeds

Regional Sites

Social Links

Your Account






Forgot login? Click here.
No account yet? Subscribe